SamnanTools Lakshmi 3L Tilting Wet Grinder – Official User & Safety Manual

Contents

1. Safety Instructions
2. Product Diagram & Specifications
3. Installation & Setup
4. Operation
5. Cleaning & Maintenance
6. Troubleshooting
7. Warranty & Service
8. Contact & Support

1. Safety Instructions

• Only operate the appliance on a stable, level surface.
• Keep hands, hair, loose clothing and utensils away from the rotating parts.
• Always switch off and unplug the machine before cleaning, servicing, or removing parts.
• Do not immerse the main body (motor unit) in water. Clean with a damp cloth only.
• Use only recommended accessories and spare parts from the manufacturer.
• Do not operate the grinder if the power cord or plug is damaged. Replace immediately.
• Keep the machine away from children and pets.
• Do not use the machine outdoors or near water sources.

2. Product Diagram & Specifications

Illustration: Refer to the product image above. Labels: A — Lid, B — Drum, C — Tilting Lock Lever, D — Motor Housing, E — Power Switch, F — Base & Feet

3. Installation & Setup

1. Unpacking

   Carefully remove the unit from the packaging. Check for any visible damage. Retain packaging for future transport.

2. Placement

   Place the grinder on a dry, level surface. Ensure adequate ventilation around the motor housing and a minimum clearance of 10 cm on each side.

3. Power Connection

   Check the voltage and frequency on the rating plate before connecting. Use a proper grounded socket. Do not use extension cords unless rated for the appliance.

4. Initial Test Run

   Before using with food, run the empty grinder for 30 seconds to ensure smooth operation. If vibrations or noises are abnormal, stop immediately and contact support.

4. Operation

Preparing Rice/Grains

Soak rice for the recommended time depending on your recipe. Drain excess water. Do not overload the drum — for best results process up to 1.0–1.5 kg per batch.

Operating Steps

1. Place the drum in position and secure the lid.
2. Switch ON the power using the main switch located on the motor housing.
3. Feed the soaked rice into the drum. Do not insert hands or utensils while machine is running.
4. Allow grinding until desired consistency is reached. Use short pulses for coarse textures.
5. Switch OFF before tilting the drum for emptying.
6. Use the tilting lock lever to tilt the drum and pour the batter into a container.

5. Cleaning & Maintenance

Daily Cleaning

1. Switch off and unplug the unit before cleaning.
2. Remove the drum and lid. Wash with warm water and mild detergent. Rinse and dry thoroughly.
3. Wipe the motor housing with a damp cloth. Do not allow water to enter the motor vents.

Periodic Maintenance

• Inspect rubber feet and tighten or replace if worn.
• Check screws and fasteners; tighten if necessary.
• If grinding performance reduces, contact authorized service for inspection of internal components.

6. Troubleshooting

7. Warranty & Service

This product is covered by a limited manufacturer’s warranty. Warranty covers defects in materials and workmanship under normal use for 12 months from date of purchase (check warranty card for exact terms).

• Warranty does not cover damage due to misuse, unauthorized repair, or commercial use.
• Keep your purchase invoice and warranty card safely for claims.

8. Contact & Support

For spare parts, service requests, or warranty support, contact:

SamnanTools
Phone: +91 9074323019
Email: [email protected]
Website: www.samnantools.in