Only logged in customers who have purchased this product may leave a review.
SAMNANTOOLS INTOUGH Circular Saw G7185
Model: G7185
Blade Size:Ø 185mm
Rated inpute Power:1450W
Rated inpute Power:1450W
No-load Speed:5000r/ min
Rated Voltage:220-240V
Blade Bore: 20mm/25.4mm
Cutting Capacity(90°): 59mm
Cutting Capacity(45°): 38mm
Blade Bore: 20mm/25.4mm
Cutting Capacity(90°): 59mm
Cutting Capacity(45°): 38mm
Related products
Makita Circular Saw HS7600
- Ergonomic rubberized front grip and handle provide added comfort
- Well-balanced and Lightweight for superior handling and performance
- Powerful 1,200 W motor delivers 5,200 RPM for performance and job site durability
- Large cutting capacity (64 mm at 90°, 42 mm at 45°)
- Heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts
- Bevel cuts 0°- 45° for the most common cutting applications
- Large and easy-to-read markings on base for more precise cutting
- Flat motor housing design for stability when changing the blade
- Conveniently located shaft and lock for easy blade replacement
- Two-stage safety trigger switch prevents accidental start up (For tool with Lock-off button)
- Lock-on button for continuous use operation (For tool with Lock-on button)
- Rear dust port exhausts sawdust away from operator for clean and comfortable operation
- Single action lever for quick adjustment of cutting depth
- Aluminum diecast safety cover for high durability and long tool life
- Optional dust nozzle can be attached for use with a vacuum cleaner
- Handy guide rule allows operator to do extra-accurate straight cuts
- Externally accessible brushes for easy serviceability
- Ideal for framers, roofers, carpenters and general contractors
- Double insulated
Makita Combination Hammer With Self Dust Collection HR2650
- HEPA Filter Removes Particles with an Efficiency Rating of 99.75%
- Dust collecting port on telescopic guide with a sliding range of 190 mm enables to accept longer drill bits
- Secure connection between dust case and dust collecting section for less dust leakage
- See-through dust case for easy checking of collected dust amount
- Easy dust case removal for convenient dust disposal and cleaning
- Easy to adjust position of dust collecting port
- A desired drilling depth can be obtained simply by sliding a push button on telescopic guide
- Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- Soft grip provides more comfort and control
- Powerful 800 W motor delivers 2.2 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
- 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Variable speed trigger allows operator to adjust speed based on materials or application
- Depth gauge for increased drilling consistency
- Recessed lock-on button for continuous use
- Double insulated
Makita Cordless Circular Saw DHS660
- Compact and Lightweight Design for Better Maneuverability
- Indication lamp using ADT (Automatic torque Drive Technology)
- High-efficiency BL motor provides higher power and more work amount
- Smooth cutting at high rotational speed of 5,000 RPM
- ADT (Automatic torque Drive Technology) adjusts speed and torque during operation for optimum performance
- Easy-to-operate lock off button for increased maneuverability
- Better visibility of blade tip by changing the position of front grip
- Easy-to-read scale markings for easier adjustments
- Optional hook for hanging on 2X materials
- Blower function blows sawdust off the cut line ahead for a better cutting view
- Dual LED job lights with preglow and afterglow functions for more visibility
- Soft grip provides increased comfort on the job
- Large rubberized levers for quick and easy depth and bevel adjustments
- Electric brake for maximum productivity and increased operator safety
- Soft start suppresses start-up reaction for more control and better accuracy
- Dust nozzle is attachable for connecting to vacuum cleaner
- Aluminum base with 45 and 50 degrees bevel cutting capacity
- Rear dust exhaust port
- Large, comfortable front grip. Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
Makita Circular Saw HS0600
- Enables single-pass cutting of 89 mm (3-1/2″) 4x materials
- Large cutting capacity (97 mm (3-13/16″) at 90° with 260 mm (10-1/4″) blade, 101 mm (4″) at 90° with 270 mm (10-5/8″) blade) and bevel capacity (0°-50°)
- Magnesium components create a lightweight saw that is well balanced and job site tough
- Fine parallel adjustment of the base plate to the saw blade
- Compatible with optional guide rail for increased maneuverability
- Powerful 2,100 W motor delivers 4,300 RPM
- Rigid aluminum base provides smooth cutting thanks to its lightness, toughness and good bend resistance
- Rear angular guide for smooth and precise adjustment of bevel angle
- Dust nozzle is attachable for connecting to vacuum cleaner
- Handy guide rule allows operator to do extra-accurate straight cuts
- Soft grip provides increased comfort on the job
- Make quick, one-handed adjustments using large, rubberized levers
- Flat motor housing design for stability when changing the blade
- Rear dust port exhausts sawdust away from operator for clean and comfortable operation
- Onboard hex wrench for fast and easy blade changes
- Two-stage safety trigger switch prevents accidental start up (For tool with Lock-off button)
- Lock-on button for continuous use operation (For tool with Lock-on button)
- Conveniently located shaft lock for easy blade replacement
- Externally accessible brushes for easy serviceability. Double insulated
Makita Cordless Combination Hammer DHR280
- BL Motor & AVT + SOFT NO LOAD Functions Deliver High Power and Low Vibration
- Auto-start Wireless System (AWS) connects to vacuum cleaner with Bluetooth
- Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
- 18V solution for corded power demands
- Two 18V LXT Li-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT platform
- BL motor delivers 0-980 RPM, 0-5,000 BPM and 2.8 Joules (EPTA) of impact energy for faster drilling
- BL motor with high power to weight and size ratio
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Anti-Vibration Technology (AVT) for low vibration
- Soft no load function automatically reduces the motor speed during idling to suppress the vibration
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only”
- One touch sliding chuck enables quick and easy bit changes
- Variable speed trigger allows operator to adjust speed based on materials or application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
- Electric brake for maximum productivity and increased operator safety
- Compact and lightweight
- Dual LED lights with preglow and afterglow functions illuminate drilling surface for more productivity in low light applications. Reverse switch operable by one hand. eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions. Battery protection circuit protects against overloading, over-discharging and over-heating. Depth gauge for increased drilling consistency (country-specific). Optional dust cup for a cleaner work environment
Makita Combination Hammer HR2810
- Torque Limiting Clutch Engineered to Prevent Gear Damage
- Powerful 800 W motor delivers 2.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- 3 operation modes – hammering, hammering with rotation, rotation
- “No hammering when idling” function helps increase tool life
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Ergonomic “D-shaped” handle with rubberized soft grip for increased comfort
- Recessed lock-on button for continuous operation
- Extended life brushes for more work between service intervals and less downtime
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Depth gauge for increased drilling consistency
- Double insulated
Makita Cordless Circular Saw DHS661
- Compact and Lightweight Design for Better Maneuverability
- Indication lamp using ADT (Automatic torque Drive Technology)
- High-efficiency BL motor provides higher power and more work amount
- Smooth cutting at high rotational speed of 5,000 RPM
- Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth
- ADT (Automatic Torque Drive Technology) adjusts speed and torque during operation for optimum performance
- Easy-to-operate lock off button for increased maneuverability
- Better visibility of blade tip by changing the position of front grip
- Easy-to-read scale markings for easier adjustments
- Optional hook for hanging on 2X materials
- Blower function blows sawdust off the cut line ahead for a better cutting view
- Dual LED job lights with preglow and afterglow functions for more visibility
- Soft grip provides increased comfort on the job
- Large rubberized levers for quick and easy depth and bevel adjustments
- Electric brake for maximum productivity and increased operator safety
- Soft start suppresses start-up reaction for more control and better accuracy
- Dust nozzle is attachable for connecting to vacuum cleaner
- Aluminum base with 45 and 50 degrees bevel cutting capacity
- Rear dust exhaust port. Large, comfortable front grip. Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions.
Reviews
There are no reviews yet.