Excellent Flush Cutting
Flangeless blade can be equipped
Ideal for edge cutting of threaded rods and rebars
Fine edge cutting: Rebars can be cut at 3.5 mm from the corner of lattice for both vertically and horizontally; Threaded rods can be cut also at 3.5 mm from the ground/surface
Less damage to the threaded rods and therefore nuts can be installed without removing burrs
ADT (Automatic torque Drive Technology) adjusts speed and torque during operation for optimum performance
BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
BL motor is electronically controlled to optimize battery energy use for longer run time per charge
BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
3-position removable side grip allows operator to hold tool at comfortable position
Surface treatment of base cover prevents abrasion at cutting
Dust bag collects chips or shavings left after cutting metal
Cutting capacity range of 10 – 25 mm (3/8″ – 1″) standard rebar
Highly visible, heavy-duty fluorescent material guide holds the rebar at 90Â° to the cutting blade and assists in smooth cutting
Ergonomic handle with soft grip provides increased comfort on the job
Spark free cutting of rebar and steel rod ideal for use in sensitive areas
Wire mesh intake covers are engineered to prevent debris from entering motor
Lightweight for reduced operator fatigue
3-stage LED gauge indicates battery charge level / overheating / overload. Battery protection circuit protects against overloading, over-discharging and over-heating. Up to 50 cuts of 25 mm rebar with a 5.0Ah LXT battery. Up to 90 cuts of 19 mm rebar with a 5.0Ah LXT battery. Up to 135 cuts of 16 mm rebar with a 5.0Ah LXT battery. Up to 200 cuts of 13 mm rebar with a 5.0Ah LXT battery. Up to 300 cuts of 10 mm rebar with a 5.0Ah LXT battery

Questions and Answers